No matter how carefully you maintain your ceramic bathtub, it will eventually start to look like it needs some TLC. Although you could take it to the pros and let them do the dirty work, there are plenty of ways to keep it clean on your own using products that you probably already have lying around the house (and no, we don’t mean those harsh chemical cleaners!). Use the following tips for easily cleaning your ceramic bathtub and keep it looking brand new!
Baking Soda, Vinegar, and Dish Soap
To clean your ceramic bathtub:
- Mix baking soda and vinegar in a bowl or container with some water to create a paste.
- Apply the paste to your bathtub, wait for it to sit for five minutes, then scrub it off with a sponge.
- Once you’ve removed the paste and dirt, apply dish soap to the bathtub and rub it with a sponge.
- The last step is to rinse the soap off with hot water from your faucet.
Salt, Water & Boiling
The salt and water mixture is the most common and cheapest way to clean a ceramic bathtub. Pour a cup of salt into a bucket, add water until it’s full, then mix well. Pour this into your bathtub, scrub with a scouring pad and rinse with warm water. Salt has natural disinfectant properties, which will also help kill any bacteria lurking in your maax ariosa 6636 bathtubs.
If you have a stubborn stain or soap scum that doesn’t want to budge, fill the bathtub halfway with boiling water, and add more salt if necessary until the water is saturated. Scrub with some steel wool or an old toothbrush until you can see no more dirt.
Hydrogen Peroxide and Baking Soda
- Mix one part hydrogen peroxide with two parts baking soda and add a little water until you get a paste-like consistency.
- Apply the paste to the bathtub, wait three minutes and then scrub it off with a sponge or cloth.
- Rinse with water to remove all baking soda residue and hydrogen peroxide from the surface of your ceramic bathtub, making sure not to miss any spots that might have remained even after you scrubbed it down earlier.
- You can also use this technique on sinks, countertops, and other ceramic surfaces around your home or office to keep them clean and shiny!
Ammonia, Bleach and Lemons
Mix 1/4 cup of ammonia, one teaspoon of bleach, and the juice of one lemon. Pour this mixture onto a clean sponge or scrubbing pad. Scrub the area with the solution until it is all gone. Rinse thoroughly with water to remove any residue.
Acetone and Palmolive Dish Soap
- Fill your epic tub with hot water and add generous dish soap.
- Let the bath sit for 10-15 minutes so that the soap can work its magic.
- Wipe down the tub’s surface with a sponge or cloth to remove any dirt, soap bubbles, or residue that may be stuck to it.
- Rinse out your sponge or cloth in warm water and wipe down the tub’s surface again to remove any leftover residue from before you used your sponge or cloth to clean it
- Fill the tub up halfway with cold water.
- Add four tablespoons of acetone and one teaspoon of Palmolive Dish Soap to the cold water, stirring them together until they’re fully combined.
- Allow the mixture to bubble for about five minutes, then drain away all but about two cups’ worth of liquid from inside the tub (this will ensure that your final rinse will get rid of all soap residues).
- Rinse any remaining streaks or residue by filling up half of your bathtub with cool water, turning on the full faucet blast, and wiping everything down quickly with a rag or paper towel before letting it drain away again!
Super Grout Formula
The Super Grout Formula is designed to clean and remove stains from the grout lines of your ceramic bathtub. It will not work on any other surface of the tub. To apply this product, you must use a sponge or a cloth to scrub it into the grout lines and allow it to sit for 30 minutes before wiping it away with a clean cloth. The color of the grout should turn from brown to black as you wipe away the cleaner. If there is still discoloration, repeat steps one through six until desired results are obtained.
8) How To Remove Stains From A Bathtub
- Mix 1⁄4 cup of cream of tartar with 1⁄4 cup of baking soda, then add 1⁄2 teaspoon of dishwashing detergent. Let the mixture sit for about 10 minutes before you scrub it onto the stain.
- Mix 2 tablespoons of baking soda, 1 tablespoon of white vinegar, and 2 cups of boiling water in a bowl or container with a lid. Then dip a scrub brush into the mixture and scrub away at the stain until it lifts away from the tub’s surface.
- Finally, wipe any residue with a towel or sponge dipped in warm water and vinegar.
The Natural Way
The natural way to clean a ceramic bathtub is with a homemade cleaning solution of vinegar, water, and baking soda. Pour some vinegar into the bottom of the tub, then pour in hot water and baking soda until it looks like there’s about an inch or two of liquid in the tub. Then fill the tub with cold water until it’s at your desired level. Let this sit for about 15 minutes before scrubbing it with a damp rag or sponge and wiping it dry.
What do professionals use to clean bathtubs?
A professional will use various methods to clean your ceramic bathtub. You must get your bathtub cleaned by a professional because the chemicals used are strong and not for everyday use. A professional will use a power washer or steam cleaner to remove the hard water deposits built up in the crevices of the bathtub. They will then apply chemical cleaners and sealers to protect against future damages, you can buy bathroom cleaning products from a bathroom store.
How can I make my bathtub look new?
- Start by spraying the bath with simple water and dish soap solution. Could you leave it to soak for about 10 minutes?
- Gently scrub the tub, paying close attention to any stains or buildup in hard-to-reach places like corners and between the faucet and the tub spout, using a sponge or other abrasive cleaner safe for use on your ceramic bathtub surface.
- Use a dry cloth or old towel to dry off your tub, paying close attention to any remaining residue that may have been loosened during this process.
- Rinse your tub again with fresh water and let it air dry
- Apply a coat of sealant to protect against future stains
Final Thoughts
When cleaning the bathtub, you want to focus on any dirt or scum built up in the bottom of the tub. Soak a rag in a mixture of vinegar and water and use it to wipe down the sides of your tub. Rinse with water after.
For residue buildup, mix baking soda with warm water until you get a paste-like consistency, then apply it directly to stubborn stains and allow it to sit for an hour before scrubbing with an old toothbrush. Scrub gently so as not to damage any of your ceramic surfaces.
