Comfast WiFi Extension Setup
Are there dead spots in your office or home? Do you want to increase the WiFi network coverage? Are you looking for comfast WiFi extender setup steps? You are thinking .Comfast WiFi Extension Setup .You have come to the right place if so. We have provided the simple and amazing ways to set up the wireless extender. Scroll down to learn more about the Comfast extender setup.
Steps to Comfast WiFi Extension Setup
These are the steps to enable the comfast WiFi extender setup on your device.
Step 1 : Turn on the Comfast WiFi extender and start the setup process.
2.Next, connect your extender with the wireless router by using the Ethernet cable.
3. After you have established a connection between router and extender successfully, you will need a wireless device to connect to the wifi.
4 : Open an internet browser of choice and type ap.setup into the URL bar.
5 : Now you will be redirected to Comfast WiFi extender configuration webpage.
6 – Next, enter your default username and password into the appropriate login credential field.
7 After you have successfully logged into Comfast WiFi extender setup follow the on-screen instructions for setting up your extender to an existing wireless router/modem.
Step 8 Follow the instructions to set up your extender.
How to Setup Your Comfast WiFi Extender Through 192.168.10.1?
Follow these guidelines to set up the Comfast WiFi extender device by using the 192.168.10.1IP address:
Step 1 Connect the WiFi-enabled device to the Comfast extender network.
Step 2 Next, open an internet browser from your system. In the URL bar, enter 192.168.10.1 IP.
Step 3 : You are now navigating to the Comfast WiFi range extender configuration webpage.
Step 4 Type the default username/password in the respective fields. admin.
Step 5 Next, choose the repeater from your computer or laptop. You will not get this option on your phone.
Step 6 – The extender will begin searching for all available WiFi networks.
Step 7 – Select the right wireless network to boost.
8 Type the password for your modem or router at home.
Step 9 Wait until all settings are applied.
Step 10 Finally, a message on the screen will indicate that the wireless booster was installed successfully.
Setup of Comfast Range Extenders with WPS Button
Follow the steps below to set up the Comfast WiFi range extender with the help WPS button
Step 1 First, connect your Comfast extender with the main WiFi router.
Step 2 Next, hold down the WPS button on the extender for 10 seconds. Then release the button.
Step 3 Next, press and hold WPS on your modem or router.
Step 4 :Now you’ll notice that the blue LED light from the extender starts blinking. This indicates that the modem has successfully connected to the booster and the extender.
Step 5 After your device is successfully connected, connect the Comfast WiFi extender with the home network.
6 – It will now ask you for your password.
Step 7 Finally, your extender has been install. You can place it anywhere you like and then use the internet to access it.